Set Up Enterprise

Set up your enterprise for individual identity proofing.

If all of your clinicians will be identity proofed within your organization with Enrollment Supervisors, you can skip this section. See Institutional Identity Proofing.

SMTP Connection

An SMTP server must be specified to send email notifications to administrators and end users.

Configure a Connection with Basic Authentication

You can configure a connection to an SMTP server using basic (password) authentication.

NOTE:

Microsoft deprecated basic authentication in Exchange Online. While you can configure a connection using basic authentication, it is recommended that you configure the connection to your mail server over OAuth.

To configure the connection:

  1. In the Imprivata Admin Console, go to the gear icon > Settings.

  2. In the Email configuration section, click SMTP Server > Modify.

  3. SMTP Server — Type the IP address or FQDN of the mail server

  4. Optional —By default, the Imprivata appliance secures outgoing email using TLS.

    Uncheck Use TLS to disable this functionality. If you choose to leave TLS enabled, consider the following:

    • Imprivata supports TLS versions up to 1.2, but does not enforce any specific version. How your environment is configured determines the required version.

    • Your SMTP server must support TLS, and additional configuration may be required. For more information, see your vendor-specific documentation.

  5. If required, type the SMTP Server Account Username and Password of an account that is authorized to send email through your server/mail relay.

  6. Email messages are from — Enter the sender address.

  7. Click Save and activate.
NOTE:

The Test button only confirms that the connection can be made to the SMTP server. To test that an email can be sent and received, open the Users page. Select a user, click Notify, and select the type of notification to send as a test.

Configure a Connection Over OAuth

You can configure a connection to an SMTP server over OAuth.

Prerequisites

Before you begin, make sure the following prerequisites are met:

  • Exchange Online is enabled for SMTP AUTH.

  • You have a user account that can be used to send email. This account must be able to send email from the mailbox you specify.

  • You have registered an Entra ID application that lets Imprivata connect to Exchange Online over SMTP. Configuring the connection requires that you have its:

    • Client ID

    • Tenant ID

    • Client secret

  • You have registered the application's service principal in Exchange Online and granted the mailbox Send As permission.

Configure the Connection

To configure the connection:

  1. In the Imprivata Admin Console, go to the gear icon > Settings.

  2. In the Email configuration section, click SMTP Server Modify.

  3. Select Exchange Mail Server with OAuth2.

  4. Enter the following required information:

    1. From Address: Enter the mailbox from which email notifications should be sent.

    2. Client ID: Enter the registered application’s client ID.

    3. Tenant ID: Enter the registered application's tenant ID.

    4. Username: Enter the user account that can send email from the mailbox you specified.

    5. Secret: Enter the registered application's client secret.

  5. Click Save and Activate.

Imprivata Cloud Connection

Your Imprivata enterprise must be connected to the Imprivata cloud so Imprivata can send your users an SMS text message or voice call during Individual identity proofing.

Cloud Connection

Imprivata Services will enter the Enterprise ID and one-time cloud provisioning code required to establish trust between your Imprivata enterprise and the Imprivata cloud:

  1. If you're not on the Cloud Connection page already: In the Imprivata Admin Console, click the gear icon > Cloud connection.

  2. Click Test Connectivity.

  3. Services will enter your Enterprise ID and cloud provisioning code.

  4. Click Establish trust.

BEST PRACTICE:

The cloud connection must be established by Imprivata Services.

Cloud Connection Status

You can review the status of your enterprise's connection to the Imprivata cloud at any time. Status notifications are displayed on the Imprivata Admin Console, and the cloud connection status of every appliance at every site is also available:

  1. In the Imprivata Admin Console, go to the gear icon > Cloud connection.

  2. Every appliance host is listed with its status. If there are problems with a connection, recommendations for resolving the problem are displayed here.

Active Directory Requirements

The following Active Directory (AD) attributes are required to enable identity proofing. Verify that the following attributes in AD are present and accurate for all providers for Individual identity proofing:

  • First Name and Last Name must exactly match their government ID;

  • Email Address — required for the clinician to receive a verification message during identity proofing;

  • Phone Number — the clinician must be able to receive an SMS message or voice call at this number during identity proofing.

View, add, or edit these values in AD, and if necessary, re-sync with your EAM enterprise. If AD does not have these values, you can add or edit these values on the User details page > Individual Identity Proofing section in the Imprivata Admin Console.

For security reasons, your users cannot add or edit their own name, email, or phone number.

Configure Telephone Numbers in Active Directory

Configure the homePhone and mobile telephone number attributes in AD.

For complete details on synchronizing your AD users with Imprivata, see Synchronizing the Users List.

  1. Click Synchronize on the Users page. The Synchronize window opens.

  2. Select the domain or file that holds the user records, and click Next.

  3. Select the users to be imported.

  4. Click the Add button in the Extended User Attributes section. A three-field map opens.

  5. In the Extended User Attribute Name field, enter homePhone.

  6. In the Imprivata Meaning field, enter Phone (home).

    The label that will appear in the Users list is automatically filled in with the Imprivata Meaning value, but you can make edits.

  7. Click Add to add another.

  8. In the Extended User Attribute Name field, enter mobile.

  9. In the Imprivata Meaning field, enter Phone (mobile).

    The label that will appear in the Users list is automatically filled in with the Imprivata Meaning value, but you can make edits.

  10. Click Save.
NOTE:

When a user has all three phone Extended User Attributes, when selecting a number for sending the verification code, mobile is the primary selection, followed by home and office.

CAUTION:

The text strings in the Extended User Attribute Name fields must exactly match the field names in AD or the extended user attributes will not be synchronized.

Phone Number Format

  • Specify a 10-digit US telephone number in any format.

  • The country code 1 is optional.

  • Hyphens, periods, and parentheses are allowed.

  • A phone number with any other non-digit characters will be ignored.

  • Any telephone number that doesn't meet these criteria or is malformed in any other way will be ignored. The clinician will not be able to begin identity proofing until the number is corrected in AD or the Imprivata Admin Console.

  • If a clinician's telephone number(s) are not present in AD, the clinician will receive an error message. You can add or edit the phone number(s) on the User details page of the Imprivata Admin Console.